Engraving Devices

GraverMax G8

This engraving system gives each handpiece excellent range of power with perfect control throughout an expanded range of impact speeds. The GraverMax G8 features 400 to 8000 strokes per minute, a throttle bias adjustment valve for tailoring throttle response to your work and a dual-stage precision air regulator.

GraverMach AT

Familiar to anyone who uses its predecessors including the GraverMax. But the expanded capability of precise, selectable hand control puts this new power tool in a class by itself. The hand control technology is based on the GRS Airtact. This advanced (patent pending) air logic system provides hand power control without adding moving parts to the handpiece itself. The result is a rugged and intuitive way to control handpiece power by hand.

GraverSmith

This new power tool offers basic work capability and pneumatic impact power for stone setting and engraving. It is ideal for production stone setters, multiple factory installations, and individual craftsmen on a budget.

Handpiece 901

Model 901 features breakthrough impact technology with a HUGE power range PLUS fine control. The comfortable, compact shape has an adjustable side hose connection. It fits most engraving and stone setting needs including microscopic engraving, deep relief work and bead raising/hammer setting. Made from fully heat-treated stainless steel.

Handpiece Monarch

This is the finest impact handpiece for ultra-fine engraving, including bulino and banknote styles. Featuring a heat-treated stainless steel body, aluminum knob, and adjustable hose connection. Not intended for stone setting.

Handpiece Magnum

Magnum has a huge range of power, from amazingly heavy to very fine. The Magnum exceeds the power of previous models that are twice the length. It also has fine control with shading capability.

Handpiece Manual QC

This handle lets you use any QC tool for hand work. Made with a comfortable rubber cover. Includes 3 QC Tool Holders.

Handpiece Manual QC Set

Made from machined stainless steel and a fiber-reinforced thermoplastic. The set includes three handles: 2″, 2.25″ and 2.5″ (50mm, 57mm, and 64mm) and a sapphire blue acrylic storage tray that fits all GRS tool carousels.

Standard QC Holder

Quick change (QC) tool holding system lets you change tools in seconds without a wrench. Tool shanks can be a variety of round, square, rectangular, and even odd shapes. This system is standard on many GRS power handpieces.

XL QC Holder

Quick change (QC) tool holding system lets you change tools in seconds without a wrench. Tool shanks can be a variety of round, square, rectangular, and even odd shapes. This system is standard on many GRS power handpieces.

XS QC Holder

Quick change (QC) tool holding system lets you change tools in seconds without a wrench. Tool shanks can be a variety of round, square, rectangular, and even odd shapes. This system is standard on many GRS power handpieces.

Medium QC Holder

Quick change (QC) tool holding system lets you change tools in seconds without a wrench. Tool shanks can be a variety of round, square, rectangular, and even odd shapes. This system is standard on many GRS power handpieces.

QC Onglette Graver

Fits into any GRS QC Tool Holder and most other power handpieces. High-Speed Chrome Tool Steel. Available in sizes #5/0 (1.16mm) to #8 (3.36mm)

QC Flat Graver

Fits into any GRS QC Tool Holder and most other power handpieces. High-Speed Chrome Tool Steel. Available in sizes #2 (0.2mm) to #28 (2.8mm)

QC Knife Graver

Fits into any GRS QC Tool Holder and most other power handpieces. High-Speed Chrome Tool Steel. Available in sizes #18 (1.8mm) to #32 (3.2mm)

 

QC Round Graver

Fits into any GRS QC Tool Holder and most other power handpieces. High-Speed Chrome Tool Steel. Available in sizes #2 (0.2mm) to #28 (2.8mm)

 

QC C-Max Carbide Gravers

Achieves a hardness balance like no other carbide. For years, engravers and jewelers have used other carbide gravers that break easily. Now, this frustration is gone forever. Available in 60, 75, 90, 105, and 120 degrees.

QC Tungsten Carbide Gravers

These are much harder than any tool steel, but more brittle. They last up to 10 times longer between sharpenings when properly used. Sharpen with a diamond wheel. Size: .085″ (2,2mm) square X 2″ (50mm).

QC Burnish Tool

This special tool, made from solid tungsten carbide, is used for burnish, rub-over, or “gypsy” stone setting. Size: 2.35mm square, 48mm long.

QC V-Point Gravers

Made from GlenSteel HSS. With a precision ground V-Point geometry. They come in 60°, 75°, 105°, and 120° points. You just sharpen the face, add your style of heel, and use. “V” Length: 31.8mm. Overall Graver Length: 61mm.